Aluminium poles are made of a special AlMgSi alloy with higher elasticity. The durability and aesthetics of the poles have been achieved thanks to the anodizing process with the minimum coating thickness of Al/An 20µm. The wall thickness is 1,5 – 3,5 mm.
Flagpoles are produced according to the PN-EN 40 and PN-EN 1991-1-4:2008 standards.
The installation of aluminium flagpoles is economical because of:
-no need for heavy assembly equipment,
-easier and cheaper transport,
Aluminium can be easily utilized.
The raw material used for the production of aluminium flagpoles are mostly from recycling
Flagpoles are exposed to negative atmosphere factor. Aluminium used as the basis material helps to minimize this effect.
Aluminium creates a protective coat on its external structure. Therefore, there is no need for painting and galvanizing as it is with steel flagpoles.
Various forms of finish of aluminium surface are available.
Normally aluminium flagpoles are satinated. At additional cost, they can be powder coated – according to RAL palette or anodized.
The rope is in the flagpole and it is fixed to the internal cleat (or winch system optionally). It eliminates the noise which can be caused by the rope hitting the flagpole. It also secures the flag against theft. The flagpole is installed in the hinged base plate or ground sleeve.
|plastic cap (super version)||0,06|
|rotating truckhead (plastic- aluminium)||0,21|
|rotating truckhead with plastic cap||0,27|
|Gold bulb (brass) – option for rotating truckhead||0,22|
|Silver bulb (aluminium) – option for rotating truckhead||0,16|
|Rope (kevlar) with swivel||0,01 /mb
|internal cleat [option]||0,026|
|hoisting winch [option]||0,915|
|flag weight [option]||1,3|
|plastic band||0,034 /mb|
|Hinge base plate
Installed in foundation/ upper + lower part
|Portable base (for concrete flags 50x50cm)
Installed with upper part of hinge base plate.
installed in foundation
For prices please contact our sales department