Aluminium poles are made of a special AlMgSi alloy with higher elasticity. The durability and aesthetics of the poles have been achieved thanks to the anodizing process with the minimum coating thickness of Al/An 20µm. The wall thickness is 1,5 – 3,5 mm.
Flagpoles are produced according to the PN-EN 40 and PN-EN 1991-1-4:2008 standards.
The installation of aluminium flagpoles is economical because of:
-no need for heavy assembly equipment,
-easier and cheaper transport,
Aluminium can be easily utilized.
The raw material used for the production of aluminium flagpoles are mostly from recycling
Flagpoles are exposed to negative atmosphere factor. Aluminium used as the basis material helps to minimize this effect.
Aluminium creates a protective coat on its external structure. Therefore, there is no need for painting and galvanizing as it is with steel flagpoles.
Various forms of finish of aluminium surface are available.
Normally aluminium flagpoles are satinated. At additional cost, they can be powder coated – according to RAL palette or anodized.
The flag is hoisted via the rope. The external rope is mounted on the cleat which is 1,5m above the ground. The flag exposition depends on the gusts of wind. Th flagpole is installed in concrete foundation with the use of hinge base plate or ground sleeve.
|plastic cap (standard version)||0,06|
|rotating truckhead (plastic- aluminium)||0,21|
|rotating truckhead with plastic cap||0,27|
|Gold bulb (brass) – option for rotating truckhead||0,22|
|Silver bulb (aluminium) – option for rotating truckhead||0,16|
|Hinge base plate 65/80/82,5/95mm
Installed in foundation / upper + lower part
|Portable base (for concrete flags 50x50cm)
Installed with upper part of hinge base plate.
|ground sleeve 60/80/82,5mm [flagpoles 5-10m]
installed in foundation
For prices please contact our sales department.