Aluminium poles are made of a special AlMgSi alloy with higher elasticity. The durability and aesthetics of the poles have been achieved thanks to the anodizing process with the minimum coating thickness of Al/An 20µm. The wall thickness is 1,5 – 3,5 mm.
Flagpoles are produced according to the PN-EN 40 and PN-EN 1991-1-4:2008 standards.
The installation of aluminium flagpoles is economical because of:
-no need for heavy assembly equipment,
-easier and cheaper transport,
Aluminium can be easily utilized.
The raw material used for the production of aluminium flagpoles are mostly from recycling
Flagpoles are exposed to negative atmosphere factor. Aluminium used as the basis material helps to minimize this effect.
Aluminium creates a protective coat on its external structure. Therefore, there is no need for painting and galvanizing as it is with steel flagpoles.
Various forms of finish of aluminium surface are available.
Normally aluminium flagpoles are satinated. At additional cost, they can be powder coated – according to RAL palette or anodized.
Mobile swage flagpole is made from one or more cylindrical aluminium tubes with the same diameter. Each tube is 120cm long and the diameter is 50mm. The tubes are narrowed so they can be put one to another. The maximum available height is 6m.
STANDARD – external rope, cleat
BANNER – with banner arm, without rope
- easy transportation – sectional construction,
- low weight of the flagpole,
- low transport costs (the longest element is less than 2m long),
- high quality aluminum alloy,
- anodized surface.
- possible to be powder coated at any colour according to RAL palette
|plastic cap (standard)||0,06|
|rotating truckhead (plastic-aluminium)||0,21|
|rotating truckhead with plastic cap||0,27|
|rotating truckhead with banner arm||1,2|
|Gold bulb (brass) – option for rotating truckhead||0,22|
|Silver bulb (aluminium) – option for rotating truckhead||0,16|
|rope (polyester or polypropylene)||0,008 /mb|
|car tyre base, with aluminium sleeve, anodized, 50 mm||1,5|
|aluminium ground sleeve, anodized, 50mm
mounted in the foundation
|steel base screwed into the ground||1,5kg|
|steel square base 48cm x 48cm with sleeve 50mm||14,5|
|polymer concrete base square
41 x 41 x 8 cm
|polymer concrete base
49 x 9 cm
For prices please contact our sales department.