Aluminium poles are made of a special AlMgSi alloy with higher elasticity. The durability and aesthetics of the poles have been achieved thanks to the anodizing process with the minimum coating thickness of Al/An 20µm. The wall thickness is 1,5 – 3,5 mm.
Flagpoles are produced according to the PN-EN 40 and PN-EN 1991-1-4:2008 standards.
The installation of aluminium flagpoles is economical because of:
-no need for heavy assembly equipment,
-easier and cheaper transport,
Aluminium can be easily utilized.
The raw material used for the production of aluminium flagpoles are mostly from recycling
Flagpoles are exposed to negative atmosphere factor. Aluminium used as the basis material helps to minimize this effect.
Aluminium creates a protective coat on its external structure. Therefore, there is no need for painting and galvanizing as it is with steel flagpoles.
Various forms of finish of aluminium surface are available.
Normally aluminium flagpoles are satinated. At additional cost, they can be powder coated – according to RAL palette or anodized.
Exclusive type is a one element, cylindrical aluminum flagpole. It is made of a special profile for internal halyard system with sliding blocks and rope. Exclusive flagpole is equipped with a rotating hoistable arm which makes the flag visible even when the weather is windless.
Available diameter: 93mm
|aluminium flat top||0,21|
|Gold bulb (brass) – option for aluminium flat top||0,22|
|Silver bulb (aluminium) – option for aluminium flat top||0,16|
|steel rope in PCV braid||0,02 /mb|
|hoisting winch with crank [option only for flagpoles 75mm or 93mm]||0,086|
|plastic band||0,034 /mb|
|rotating sleeve with arm [75/93mm]||2,6/3,4|
|Ground sleeve 75/93mm
installed on the foundation
For prices please contact our sales department